EasyManua.ls Logo

Icom IC-M421 - Page 29

Icom IC-M421
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
6
DSC OPERATION
New2001
6
A distress alert contains (default);
Nature of distress: Undesignated distress
Position data : GPS or manual input position data held for
23.5 hrs or until the power is turned OFF.
The distress call is repeated every 3.5–4.5 min., until re-
ceiving an ‘acknowledgement.’
Push [CLR] to cancel the ‘Call repeat’ mode.
??” may blink instead of position and time indications
when the GPS data is invalid, or has not been manually
updated after 4 hours.
DD
Normal call
The nature of the distress call should be included in the dis-
tress call.
q Push [MENU] to enter the DSC menu.
w Push [] or [] to select “Distress Setting,” and
push [ENT].
e Push [] or [] to select the nature of the distress, push
[ENT].
‘Undesignated,’ ‘Explosion,’ ‘Flooding,’ ‘Collision,’ ‘Grounding,’
‘Capsizing,’ ‘Sinking,’ ‘Adrift (Disable adrift),’ ‘Abandoning (Aban-
doning ship),’ ‘Piracy (Piracy attack),’ and ‘MOB (Man over-
board)’ are available.
The selected nature of the distress is stored for 10 minutes.
--DSC Menu--
Select Nature
Undesignated
˘Explosion
Flooding
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Select Item
˘Position Report
Polling Request
Received Calls
˘Distress Setting
!IC-M421-3.qxd 06.5.26 1:44 PM Page 23 (1,1)

Related product manuals