29
6
DSC OPERATION
New2001
6
DD
Transmitting an all ships call
Large ships use Channel 70 as their ‘listening channel.’ When
you want to announce a message to these ships, use the all
ships call function.
q Push [MENU] to enter the DSC menu.
w Push [▲] or [▼] to select “All Ships Call,” and
push [ENT].
e Push [▲] or [▼] to select the desired category, push
[ENT].
• The selectable category may differ according to the programmed
setting. Ask your dealer for the available categories.
r Push [ENT] to transmit the all ships call.
• Channel 70 is selected and the all ships call is transmitted.
t After the all ships call has been transmitted, the following
indication is displayed.
y Push [CLR] to exit the condition and selects Channel 16
automatically.
• Even if [CLR] hasn’t been pushed, the transceiver automatically
selects Channel 16 after 2 sec. of inactivity.
To Next Page
Loading...
