32
6 DSC OPERATION
New2001
t After setting the longitude data, push [ENT] to set the time
information appears. Set the current UTC time with [▲] or
[▼], then push [ENT].
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the UTC time data.
• Push [CLR] to cancel and exit the condition to the DSC menu.
y Push [ENT] to transmit the position report call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
u After the position report call has been transmitted, the fol-
lowing indication is displayed.
i Push [CLR] to return to the previous indication before en-
tering the DSC menu.
• Even if [CLR] hasn’t been pushed, the display automatically re-
turns to the previous indication after 2 sec. of inactivity.
To Next Page
Loading...
