Icom IC-M421 - Page 41

35
6
DSC OPERATION
New2001
6
t After setting the longitude data, push [ENT] to set the time
information appears. Set the current UTC time with [▲] or
[▼], then push [ENT].
• Push [CH•DUAL] or [16•C] to move the cursor forward or back-
ward, respectively.
• Push [SCAN•TAG] to clear the UTC time data.
• Push [CLR] to cancel and exit the condition to the DSC menu.
y Push [ENT] to transmit the position reply call to the se-
lected station.
• Your position data is transmitted, when [ENT] is pushed.
DD
Transmitting a position report reply call
Transmit a position report reply call when a position report call
is received.
q Push [MENU] to enter the DSC menu.
w Push [▲] or [▼] to select “POS Report Reply,” and
push [ENT].
•“POS Report Reply” item appears after a position report
call is received.
e Push [▲] or [▼] to select the desired individual address or
ID code, push [ENT].
r Push [ENT] to transmit the position report reply call to the
selected station.
--DSC Menu--
Select Address
˘Paul 01
Beck 02
John 03≥
--DSC Menu--
POS Reply Ready
<CLR˘Exit / ENT˘OK>
Push
--DSC Menu--
Select Item
All ships Call
Position Request
Position Report
˘POS Report Reply ≥
--DSC Menu--
Input UTC TIme
__:__ Null
<SCAN˘Null Data>
<CLR˘Exit / ENT˘OK>
--DSC Menu--
POS Reply Ready
<CLR˘Exit / ENT˘OK>
Push
!IC-M421-3.qxd 06.5.26 1:44 PM Page 35 (1,1)