Icom IC-M421 - Page 46

40
6 DSC OPERATION
New2001
DD
Receiving a polling request call
While monitoring Channel 70 and a polling request call is re-
ceived:
➥ “RCV POLL REQ” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to reply to
the call; push [CLR] to ignore the call.
DD
Receiving a position reply call
While monitoring Channel 70 and a position reply call is re-
ceived:
➥ “RCV POS RPY” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to display
the position information; push [CLR] to ignore the reply
call.
DD
Receiving a position report reply call
While monitoring Channel 70 and a position report reply call
is received:
➥ “RCV POS RPY” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to display
the position information; push [CLR] to ignore the reply
call.
INT
25W TAG
RCV POS RPY
<Paul
<CLR˘
SAFETY Beep Off>
INT
25W TAG
RCV POS RPY
<Paul
<CLR˘
SAFETY Beep Off>
INT
25W TAG
RCV POLL REQ
<Paul
<CLR˘
SAFETY Beep Off>
!IC-M421-3.qxd 06.5.26 1:44 PM Page 40 (1,1)