Icom IC-M421 - Page 50

44
6 DSC OPERATION
New2001
DD
Automatic acknowledgement
This item sets the automatic acknowledgement function ON
or OFF.
When a position request, position report or polling request call
is received, transceiver automatically transmits a position re-
quest reply, position report reply or polling reply call, respec-
tively.
q Push [MENU] to enter the DSC menu.
w Push [▲] or [▼] to select “Set up,” and push [ENT].
e Push [▲] or [▼]
to select “Auto ACK,” push [ENT] .
r Push [▲] or [▼] to turn the automatic acknowledgement
function ON or OFF
.
t Push [ENT] to set the condition.
• Push [CLR] to cancel and exit the condition to the set up menu.
--DSC Menu--
Auto ACK
˘ON
OFF
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Set up
DEL:Group ID ≤
Offset Time
MMSI Check
˘Auto ACK ≥
--DSC Menu--
Select Item
Polling Request ≤
Received Calls
Distress Setting
˘Set up ≥
!IC-M421-3.qxd 06.5.26 1:44 PM Page 44 (1,1)