Icom IC-M422 - I Channel Selection

44
12 COMMANDMIC II™ HM-157
New2001
■ Channel selection
DD
Channel 16
q Push [16•9] to select Channel
16.
w Push [CH/WX] to return to the
condition before selecting Chan-
nel 16, or push [
YY
] or [
ZZ
] to se-
lect an operating channel.
DD
Call channel
q Push [16•9
] for 1 sec. to select
call channel.
w Push [CH/WX] to return to the
condition before selecting call
channel, or push [
YY
] or [
ZZ
] to
select an operating channel.
DD
Weather channels
q Push [CH/WX] once or twice to
select the weather channel group.
w Push [
YY
] or [
ZZ
] to select a
weather channel.
e Push [CH/WX] to return to the
condition before selecting the
weather channel group.
DD
U.S.A., International and Canadian channels
q Push [CH/WX• U/I/C] to select a regular channel.
• Push [CH/WX• U/I/C] again, if a weather channel appears.
w While pushing [H/L], push [CH/WX• U/I/C] to select a
channel group.
• U.S.A., International and Canadian channels can be selected in
sequence.
e Push [Y] or [Z] to select a channel.
•“DUP” appears for duplex channels.
•“ ” appears when a simplex channel is selected.
U.S.A. channels
Canadian channelsInternational channels
While pushing ,
push .
DW
DW
DW
Push
Push for 1 sec.
Push
!IC-M422.qxd 05.2.23 2:21 PM Page 44 (1,1)