12
4
BASIC OPERATION
Selecting a Channel (Continued)
D Selecting the Channel group
There are preset international channels in the IC-M423/IC-
M423G/IC-M423GE/IC-M424/IC-M424G. Except for the Eu-
ropean versions, you can select a channel group suitable for
your operating area, as described below.
q Push [MENU].
w Rotate Dial or push [∫]/[√] to select “Radio Settings,” and
then push [ENT].
e Rotate Dial or push [∫]/[√] to select “CHAN Group,” and
then push [ENT].
r Rotate Dial or push [∫]/[√] to select the desired channel
group, and then push [ENT].
• USA (USA), International (INT), CAN (Canada), ATIS or DSC
channel groups may be selected, depending on the transceiver
version.
• Push [BACK] to return to the previous screen.
t Push [EXIT] to exit the Menu screen.
y Push [∫]/[√] to select a channel.
• Pushing [Y]/[Z] on the microphone selects only Favorite chan-
nels.
• “DUP” is displayed when a duplex channel is selected.
• “A” is displayed when a simplex channel is selected.
When the USA channel group is selected.
Channel group icon is displayed
To Next Page
Loading...
