Icom IC-M423GE - Received Call Log

63
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
 Received Call log
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
• While in the normal operating mode, “ ” blinks in the upper right
corner of the LCD when there is an unread DSC message.
D Distress message
q Push [LOG] to enter “RCVD CALL LOG” in the DSC CALLS
menu, or you can enter it through the Menu screen.
MENU  DSC Calls  Received Call Log
(Push [MENU].) (Rotate Dial, then push [ENT].)
w Push [Y]/[Z] to select “Distress,” then push [ENT].
• The Distress messages are stored in “Distress.”
• “ ” is displayed when there are unread DSC messages.
• “ ” is displayed when there are no unread DSC messages.
• No icon is displayed when there are no DSC messages.
• Push [BACK] to return to the previous screen.
• Push [EXIT] to return to the normal operating mode.
e Push [Y]/[Z] to select the desired item, then push [ENT].
r Rotate Dial to scroll the DSC message contents.
Rotate
t To delete the displayed DSC message, push [DEL].
• The confirmation screen is displayed, then push [OK] to delete.
y Push [EXIT] to return to the normal operating mode.