Icom IC-M423GE

82
9
MENU SCREEN OPERATION
■ Configuration items (Continued)
D NMEA Output
Select the Data Output function option for a NMEA output
port.
• POS data output (Default: OFF)
When receiving position data from an external or the built-in
GPS receiver,* this function sends the data from the NMEA
Output port to an external device.
*For only the IC-M423G, IC-M423GE, and IC-M424G.
• DSC data output (Default: OFF)
When receiving a DSC call, this function makes the trans-
ceiver send the DSC data from its NMEA Output port to an
external device.
All Stations: Outputs the call from any vessel from the
NMEA Output port.
Station List: Outputs the call from any vessels listed on
the Individual ID screen.
OFF: Does not output any call to an external de-
vice.