Icom ic-m424g - DSC Operation: Intership Communication; Using Intership Channels for Individual Calls

31
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Select a desired intership channel using Dial or [ e Y]/[Z],
then push [ENT].
 •Intershipchannelsarealreadypresetintothetransceiverinthe
recommended order.
A confirmation screen is displayed. r
 •Conrmthecallcontents.
Push [CALL] to make an Individual call. t
 •IfChannel70isbusy,thetransceiverstandsbyuntilthechannel
becomes clear.
Standby on Channel 70 until an acknowledgement is re- y
ceived.
When the acknowledgement ‘Able to comply’ is received, u
alarm sounds and the screen below is displayed.
Push [ALARM OFF] to stop the alarm and then select the
intership channel specified in step e.
 •Adifferent intershipchannel willbeselected ifthe stationyou
called cannot use the channel.
 •Replyusingthemicrophone.Andgotostepi.