Icom ic-m424g - DSC Operation: Individual Call Responses; Individual Call Acknowledgement Options

33
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Select one of three options, then push [ENT]. e
 •Push[EXIT]toreturntothenormaloperatingmode.
 •Push[BACK]toreturntothepreviousscreen.
 •AbletoComply:  Makeanacknowledgmentcallwithout
any changes.
 •UnabletoComply:  Youcannotmakeacommunication.
The Acknowledgement call (‘Unable to
Comply’) can be automatically trans-
mitted, if set. See page 63 for details.
 •ProposeNewChannel: You can make an acknowledgement
call, but you specify the intership chan-
nel. Select a desired intership chan-
nel, using Dial, or [Y]/[Z], then push
[ENT].
The Individual ACK confirmation screen is displayed. r
Push [CALL] to make an acknowledgement call.
The screens shown below are displayed. t
Reply to the call using the microphone. y
Push [EXIT] to return to the normal operating mode. u