Icom ic-m424g - DSC Operation: Polling Requests; Requesting Vessel Status

41
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Making a D Polling Request Call
(For only U.S.A. and Australian version transceivers)
Make a Polling Request Call when you want to know a spe-
cific vessel is in the communication area, or not.
Enter “POLLING REQUEST” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Polling Request
(Push [MENU].) (Rotate Dial, then push [ENT].)
Select a desired preset individual address, or “Manual In- w
put,” using Dial or [Y]/[Z], then push Dial or [ENT].
 •TheIDcodefortheIndividualcallcanbeenteredrst.(p.22)
 •When“ManualInput”isselected,enteradesired9digitMMSIID
code for the individual you wish to call.
 •Push[EXIT]toreturntothenormaloperatingmode.
 •Push[BACK]toreturntothepreviousscreen.
About Manual Entry:
Enter a desired individual ID in the following way:
•SelectadesirednumberusingDial,or[Y]/[Z]/[Ω]/[≈].
•Push[ENT]orDialtosetit.
•Tomovethecursor,selecteitherarrow,“←” or “→,” then push
[ENT] or Dial.
•Therstdigitisspeciedas‘0’foraGroupID.IfaGroupIDis
entered, an error beep sounds after pushing [FINISH].
•Thersttwodigitsare‘0’foranycoaststationID.
A confirmation screen e is displayed.
 •Conrmthecallcontents.