What to do if distress calls cannot be transmitted on Icom IC-M506 Transceiver?
If distress calls cannot be transmitted from your Icom Transceiver, the MMSI (DSC self ID) code may not be programmed. Program the MMSI (DSC self ID) code into the device.
Key safety precautions and repair guidelines for the transceiver.
Identification of components on the Logic Unit PC board.
Identification of components on the Main Unit PC board (top).
Identification of components on the Main Unit PC board (bottom).
Step-by-step guide to remove the Logic Unit.
Step-by-step guide to remove the Main Unit.
Explanation of the transceiver's receive signal path.
Description of AF signal processing and output routes.
Detailed explanation of the transceiver's transmit signal path.
Explanation of how the modulation signal is generated.
Explanation of the frequency generation and control circuits.
Description of the Automatic Identification System receiver.
Description of data routing for the NMEA2000 network.
Visual layout of components on the Logic Unit PC board.
Visual layout of components on the Logic Unit PC board (bottom).
Visual layout of components on the Main Unit PC board (top).
Visual layout of components on the Dial Unit PC board (top).
Visual layout of components on the Vol/SQL Unit PC board (top).
Visual layout of components on the Connect Unit PC board (top).
Visual layout of components on the Dial Unit PC board (bottom).
Visual layout of components on the Main Unit PC board (bottom).
Wiring connections for the Logic Unit.
Wiring connections for the Main Unit.
General| Type | Marine VHF Transceiver |
|---|---|
| Frequency Range (Receive) | 156.000 - 163.425 MHz |
| Waterproof Rating | IPX7 |
| DSC | Yes |
| Output Power | 25W |
| Weight | 2.2 lbs |
| Display | Full Dot Matrix LCD |
| NMEA Connectivity | NMEA 0183 |
To Next Page
