Icom IP501H - Pocket Beep Function; P-Bell Function

3
ADVANCED OPERATION
3-10
■ Pocket Beep function
The Pocket beep function sounds a notication tone and
indication when a call is received.
L This function is set by your dealer, or in the Set mode.
(p. 4-4)
L When the Pocket Beep function is ON, “
” is
displayed.
• When a call is received, the notication beep sounds
and “
” blinks.
■ P-Bell function
The P-Bell function sounds the notication tone when a
call is received.
The
icon is displayed when the P-Bell function is used.
L This function is set by your dealer, or in the Set mode.
(p. 4-4)
L You cannot listen to the call until you reply to the
call. After pushing [PTT] on the IP501H, the mute is
released.
All
10/4 12:58
Standby screen
All
10/4 12:58
Standby screen
Sales1
10/4 12:58
When an Individual call is received
Blinks