4
SET MODE
4-5
■ Setting item list (continued)
The shaded items (■ ■ ) are also displayed in the Basic Set mode.
LItems or default values may differ according to a presetting. Ask your dealer for details.
Item Description Option/range Default
Out of Range Notice Tone
Sounds the out-of-area warning
beep. The beep also sounds when
the transceiver reenters the service
area.
(
Out-of-area:
“
Pipi,
”
Reenters：
“
Popo
”
)
Disable or Enable Disable
Stop Sidetone in Out of Range
Mutes the sidetone when the trans-
ceiver is out-of-area.
Disable or Enable Disable
Sidetone
The Sidetone function outputs the
transmitting audio to a headset that is
connected to the transceiver.
When this item is set to “Enable,” the
Echo Canceller function is automati-
cally set to “Disable.”
Disable or Enable Disable
Sidetone Volume Sets the Side tone volume. 0 ~ 32 10
VOX
Automatically switches between
receive and transmit by detecting
your voice.
Disable,
earphone-micro-
phone
or headset
Disable
VOX Threshold
Sets the VOX gain level.
L
Higher values make the VOX function
more sensitive to your voice.
0% ~ 100% 40%
Echo Canceller
Sets the Echo Cancelling function.
( commonly used for an earphone
MIC and headset)
When the
“
SideTone
”
item is set to
“
Enable,
”
this item is xed to
“
Disable.
”
Disable or Enable Enable
Noise Canceller
Sets the Noise Cancelling function.
( commonly used for an IP501H, ear-
phone MIC and headset)
Disable or Enable Enable
BackLight Sets the backlight operating function. Auto, OFF or ON Auto
Contrast Sets the screen contrast. 1 (lowest) ~ 16 (highest) 8
Mic Gain
Sets the microphone sensitivity.
L
Higher values make the microphone
more sensitive to your voice.
－12 dB (lowest) ~ 12 dB
(highest) (in 3 dB step)
0 dB
Notication Beep Volume Sets the notication beep level. 0 ~ 32 10
Key-Touch Beep Sets the Key-touch beep. Disable or Enable Enable
Key-Touch Beep Volume Sets the Key-touch beep level. 0 ~ 32 10
Receive Buffer Type
Sets the Jitter buffer size.
L Jitter buffer reduces audio
interruptions.
Dynamic,
40 ~ 480 milliseconds
(in 40 milliseconds step)
Dynamic
Tx Inhibit
Inhibits transmission.
Select “Enable” to lock all the con-
trols except [PWR/VOL].
L Transmission is aslo inhibited while
using an external microphone, and
the VOX function.
Disable or Enable Disable
PTT Lock
Inhibits transmission by the internal
PTT.
Disable or Enable Disable
PTT Call at Stand-by
Displays the call-to party (Call type)
on the standby screen.
Disable or Enable Enable
To Next Page
Loading...
