Icom PMR446 - Disassembly Instructions; Removing the Rear Panel; Removing the Main Unit; Removing the RF Unit

SECTION 3 DISASEMBLY INSTRUCTION
3 - 1
A
B
B
MAIN unit
RF unit
C
D
E
G
F
•
REMOVING THE REAR PANEL
1 Unscrew 1 screw A , and 4 screws B.
2 Remove the rear panel in the direction of the arrow.
•
REMOVING THE RF UNIT
1 Remove 1 knob C, and unscrew 1 nut D.
2 Then remove the RF unit.
•
REMOVING THE MAIN UNIT
1 Unscrew 2 screws, E.
2 Remove the PTT rubber, F.
3 Unsolder 2 points, G, and remove the MAIN unit.