51
Restore the factory default settings
To restore your Platform X+ settings to factory default, simply launch iMap and
import the original settings (i.e. without making any changes) to the device through
the following steps.
1. Connect Platform X+ with the provided USB cable and launch iMap software.
2. Click the “MIDI Device” button and select “Platform X+” as the MIDI input and
output device.
Note: If Platform X+ does not appear on the pull down menu, select USB
audio as the MIDI I/O device.
3. Click “Send Data” to upload the setting to your Platform X+.
4. Close iMap, and then turn the Platform X+ power of off & on again.
To Next Page
Loading...
