ICON STAGE - Page 29

ICON STAGE USER MANUAL
28
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective
(or its driving IC on the main PCB). The Animation - movement is not located in the default position after the
reset.
Prism wheel Er
(Prism wheel- error) This message will appear after the reset of the fixture if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective (or its driving IC on
the main PCB). The Prism - movement is not located in the default position after the reset.
Prism Rot wheel Er
(Prism Rot wheel_ error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective
(or its driving IC on the main PCB). The Prism Rot - movement is not located in the default position after the
reset.
Zoom wheel Er
(Zoom wheel_ error) This message will appear after the reset of the fixture if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective (or its driving IC on
the main PCB). The Zoom - movement is not located in the default position after the reset.
Focus wheel Er
(Focus wheel_ error) This message will appear after the reset of the fixture if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective (or its driving IC on
the main PCB). The Focus - movement is not located in the default position after the reset.
Frost 1 wheel Er
(Frost1 wheel_ error) This message will appear after the reset of the fixture if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective (or its driving IC on
the main PCB). The Frost 1 - movement is not located in the default position after the reset.
Frost 2 wheel Er
(Frost 2 wheel_ error) This message will appear after the reset of the fixture if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective (or its driving IC on
the main PCB). The Frost 2 - movement is not located in the default position after the reset.
Iris wheel Er
(Iris wheel_ error) This message will appear after the reset of the fixture if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective (or its driving IC on
the main PCB). The Iris - movement is not located in the default position after the reset.
Blade 1 wheel Er
(Blade 1 wheel_ error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective
(or its driving IC on the main PCB). The Blade 1 - movement is not located in the default position after the
reset.
Blade 1 Rotation wheel Er
(Blade 1 Rotation wheel_ error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective
(or its driving IC on the main PCB). The Blade 1 Rotation - movement is not located in the default position
after the reset.
Blade 2 wheel Er
(Blade 2 wheel_ error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is defective
(or its driving IC on the main PCB). The Blade 2 - movement is not located in the default position after the
reset.