ICT ICT200DF-12 User Manual

Distribution Series 3 Dual Bus
855-314-002_Rev2.0_Instruction Manual
Page 38 of 46
Firmware Update
Download the latest Distribution Series 3 firmware file from the ICT website
(ict-power.com/resources/product-firmware/) to a local computer. Select the
"Update Firmware" button to access the Firmware Update page shown
below. Use this page to update the firmware on the unit by clicking the
"Choose File" button to link the downloaded firmware then click the "Update
Now" button. Do not disconnect power to the device during the update
process. The device restarts automatically after the update has been
completed. This will not affect the output power.
NOTICE
Updating the firmware will delete the current log file. Download
the log before updating the firmware.
Send Test E-mail
Select the "Send Test E-mail" button to send a test e-mail to the e-mail
recipients listed on the E-mail Setup page (see Section 4.8).
Ping Diagnostics Tool
Use this feature to verify connectivity of any network connected unit. Enter
the hostname or IP address of the target device, and then click the "Ping"
button to check if the device is active.

ICT ICT200DF-12 Specifications

General

Brand	ICT
Model	ICT200DF-12
Category	Power distribution unit
Language	English