ICT Protege WX User Manual

PRT-WX-DIN
Protege WX
End User Guide

ICT Protege WX Specifications

General

Communication	Ethernet, RS-485
Operating Voltage	12V DC
Enclosure Rating	IP30
Input Voltage	12V DC
Operating Temperature	-10°C to +55°C
Protocol	Osdp, Wiegand

Summary

Understanding your Protege WX System

Signing In

Instructions for accessing the Protege WX web interface using operator username and password.

Managing Users

Adding a User

Step-by-step guide to creating new user profiles with credentials, access levels, and optional dates.

Creating an Access Level

Process for defining access permissions and restrictions for users to control their actions.

Adding Doors to an Access Level

Adding Areas to an Access Level

Configuring Schedules and Holidays

Creating Holiday Groups

Creating and Editing Schedules

How to define timeframes for access control and system functions, including holiday modes.

Using a Schedule to Automatically Unlock a Door

Assigning schedules to doors to control automatic unlocking based on time periods.

Using a Schedule to Control User Access

Applying schedules to access levels to determine when users can perform actions.

Using a Keypad to Arm/Disarm your System

Keypad Functions

Overview and explanation of the primary functions of each key on the Protege keypad.

Logging in to the Keypad

Instructions for logging into the keypad using single or dual credential authentication.

Logging Off

Arming Your System

Step-by-step guide to arming different areas of the Protege security system.

Stay Arming an Area

Explains the process of partially arming an area while remaining inside, securing perimeter points.

Force Arming an Area

Disarming Your System

Procedure for disarming specific areas within the Protege system upon entering.

Entering a Duress Code

Acknowledging an Alarm