IDEAL Networks NaviTEK NT - TRoute4 and TRoute6 Tests

NaviTEK NT 153800 Iss 1
User Guide Page 20
TRoute4 and TRoute6
Trace Route will display the route and measure transit delays of frames across an IP network.
Press the soft key SETUP (F3) to enter the target or select one from the v4 or v6 TARGET
look-up table, and to view or amend the test settings.
Select an individual hop to
view its statistics.
The soft keys PREV (F1)
and NEXT (F3) and are
used to
navigate between
individual hops.
Each hop is traced three
times. The time recorded
during each trace is
displayed in ms as T1, T2
and T3.
Fig 32