NaviTEK NT 153800 Iss 1
User Guide Page 21
Statistics
From the Ethernet home screen select the STATS icon, the Stats screen is shown on the
display,
Stats menu description
Select from the buttons below the graph to provide the information that follows:
IP The F2 soft key is used to toggle between IPv4 and IPv6 data.
The IPv4 data listed is:
Info: IP Assigned successfully or, Listening or, DHCP failed.
Also listed are: IP Address, Gateway, Subnet Mask, Primary & Secondary DNS, DHCP
Server.
The IPv6 data listed is:
Info: IP Assigned successfully or, Listening or, DHCP failed.
Also listed are: IP Address, Prefix-64 or 128 bit, Link Address, Gateway, Primary &
Secondary DNS.
MAC
Tx and Rx data listed is:
Total frames, Total Bytes,
LINK
Port data listed is:
PoE Voltage: 0 to 60V, Speed, Duplex.
Partner data listed is:
10M-HD, 10M-FD, 100M-HD, 100M-FD, 1000M-HD, 1000M-FD.
To Next Page
Loading...
