IDEAL Networks NaviTEK NT - Replaceable RJ-45 Socket Insert

NaviTEK NT 153800 Iss 1
User Guide Page 7
Replaceable insert – RJ-45 socket
To replace a damaged or worn RJ-45 socket insert proceed as follows:
Equipment required: Kit, IDEAL part number 150058 – includes Tool x1 and Replacement
Insert x10.
1. Switch the NaviTEK NT off.
2. Remove cables.
3. Carefully push the tool STRAIGHT into the socket. BE CAREFUL - DO NOT MOVE
THE TOOL VERTICALLY!
4. Keeping the tool STRAIGHT firmly pull the insert out from the socket.
5. Using fingers replace a new insert STRAIGHT into the socket and secure in place
by firmly pushing
3. 4. 5.
Functional overview
Function NaviTEK NT
LAN testing over copper

IPv4

IPv6

Advanced Wiremap

PoE detection

Tone Generator

Ping test

Traceroute test

Hub blink
