IDEAL Classic LXRS 230

Overview of the Classic LXRS and RS boiler range, including model specifics.

Specifies where the boiler can and cannot be installed, focusing on wall suitability and external placement.

Explains system types and pipework requirements for boiler water connections.

Details required minimum clearances around the boiler for operation and servicing.

Guidance on flue installation and terminal positioning according to BS. 5440:1.

Step-by-step guide for lifting and mounting the boiler onto the wall plate.

Step-by-step guide for lighting the pilot burner and main burner.

Recommendations for regular appliance checks and annual servicing by a CORGI installer.

Instructions for cleaning the main burner, pilot burner, thermocouple, and spark electrode.

Procedure for replacing the piezo ignition unit.

Guide for replacing the control thermostat phial and head.

Detailed steps for removing and replacing the heat exchanger assembly.

Troubleshooting steps when the pilot burner fails to ignite.

Troubleshooting steps when the pilot burner does not remain lit after release.

Troubleshooting steps when the pilot is lit but the main burner does not operate.