To Next PageTo Next PageWhat to do if my IDEAL LOGIC + Heat 30 Boiler has no central heating or hot water?
If your IDEAL Boiler isn't providing central heating or hot water, first ensure the mains switch (fused spur) is turned on and the mode control knob is in the ON position. Check the timer settings and adjust as needed. If the boiler displays '0', contact a Gas Safe Registered Engineer or a Registered Gas Installer.
General| Model | IDEAL LOGIC + Heat 30 |
|---|---|
| Category | Boiler |
| Output | 30 kW |
| Dimensions | 700 x 395 x 278 mm |
| Fuel Type | Natural Gas |
| ERP Rating | A |
| Mounting | Wall Mounted |
| CH Output | 30 kW |
| Max Working Pressure | 3 bar |
| Warranty | 7 years |
Overview of the Logic + Heat boiler's features and operation.
Covers gas safety, electrical supply, and important installation/usage rules.
Key operational warnings and safety considerations for users.
Step-by-step guide on how to light the boiler for the first time.
Instructions on how to reset the boiler if it fails to operate.
Required space around the boiler for proper installation and servicing.
Adjusting heating temperature and using the economy mode for efficiency.
How the weather compensation system controls room temperature.
Identification and function of the boiler's main controls and indicators.
Details on frost protection, overheat protection, and flame failure.
Steps to take if the condensate pipe freezes or becomes blocked.
Guidance on regular cleaning and the importance of annual servicing.
A guide to diagnose and resolve no heating or hot water problems.
Understanding the different display codes and what they mean.
Detailed list of fault codes, their descriptions, and recommended actions.
