IDEAL LOGIC COMBI ESP1 30 User Manual

7
User’s
DISPLAY CODE ON BOILER
DESCRIPTION
The boiler is in standby operation awaiting either a central heating call or hot water demand.
The boiler has a call for central heating but the appliance has reached the desired
temperature set on the boiler.
The boiler has a call for hot water but the appliance has reached the desired temperature set on
the boiler.
The boiler is operating in central heating mode.
The boiler is operating in domestic hot water mode.
The boiler is operating in frost protection.
7. NORMAL OPERATION DISPLAY CODES
FOR ANY QUERIES PLEASE RING THE
IDEAL CONSUMER HELPLINE : 01482 498660
NOTE. BOILER RESTART PROCEDURE -
To restart the boiler press the RESTART button. The boiler will repeat the ignition sequence if a heat demand
is present.
The boiler mode knob (C) is in the off position, rotate fully clockwise for hot water and central
heating operation.
FP
- -
54
54
00
54
54
o
C
o
C
o
C
o
C

IDEAL LOGIC COMBI ESP1 30 Specifications

General

Brand	IDEAL
Model	LOGIC COMBI ESP1 30
Category	Boiler
Language	English