39
INSTALLATION
Solar Thermal - Installation and Servicing
34
IN ROOF MOUNTING (TS 8001) - MOUNTING SYSTEM 45
O
ELEVATION
INSTALLATION
9a. Push the clamping piece extension halfway into the inner groove
of the mounting rails (upper and lower) and tighten
Order: mounting rail – clamping piece extension – washer – nut
10. Insert the following mounting rails (upper and lower) and
attach them using the clamping piece extension
Order: mounting rail – clamping piece extension – washer –
nut
11. Attach the mounting rails (upper and lower) using the base brak-kets
Order:
support rail – hammer-head bolt – base bracket – washer – nut
9a
9b
10
11
207786-2.indd 39 16/02/2012 11:26:19