32
17
19
Fit the rear insulation (pack IE 10)
8229-EN-30 A
8229-EN-29 A
Pack IE 41 to IE 47:
Fit the left and right wiring ducts, respecting the assembly
direction and attach each casing support (1 bolt HM 5x12 +
1 lock washer) and the cross pieces (2 bolts HM 5 x 12 +
lock washer).
Fit the front top panel (pack IE 10) and fix on the wiring ducts
using 4 bolts HM 5x12 + lock washers.
Position the control in the slots (rear slots for the DELUXE
control panel, front for the standard control panel).
Open the control panel: 2 self tapping screws at the front for
Deluxe control panel, or 3 screws at the back for the standard
control panel.
8229-EN-32
Standard control panel
Deluxe control panel
Viceroy GT Range - Installation
ASSEMBLY
18
To Next Page
Loading...
Need help?
General