Need help?Do you have a question about the Idemia VisionPass and is the answer not in the manual?
General| IP Rating | IP65 |
|---|---|
| Device Type | IP Access Controller |
| Authentication Methods | Fingerprint |
| Fingerprint Sensor | Optical sensor |
| Face Recognition | 3D face recognition |
| Connectivity | Ethernet, Wi-Fi (optional) |
| Operating System | Linux |
| Power Supply | PoE (Power over Ethernet) |
| Communication Interface | Wiegand, RS485 |
Lists all items included in the VisionPass terminal box.
Details compliance with Radio Equipment and RoHS Directives.
Provides guidance on power supply, installation, and electrical connections.
Highlights the main functionalities and components of the VisionPass terminal.
Advises on placement, lighting, and background for best performance.
Specifies recommendations for spacing between devices in parallel lanes.
Describes the VisionPass terminal's role alongside controllers, alarms, and door latches.
Illustrates the step-by-step process from user access request to gate opening.
Details different modes for configuring identification, authentication, and multifactor access.
Specifies operating temperature, humidity, and general precautions for deployment.
Explains the three methods for guiding users to position their face for identification.
Describes how to configure camera activation based on user request for privacy.
Details pinouts and wiring for Ethernet, RS-485/422, and GPIO connections.
Provides wiring details for Wiegand In and Wiegand Out interfaces.
Details power supply requirements, cable gauge, and maximum distances.
Explains the daisy-chain configuration for RS-485 installations and cable requirements.
Details the point-to-point configuration for RS-422 and recommended cabling.
Covers Ethernet cable types, repeater recommendations, and static IP settings.
Describes support for 802.11b/g standards and security protocols like WEP, WPA, WPA2.
Details wiring for Wiegand Data 0, Data 1, and GND, including LED indicators.
Specifies maximum cable distances for different AWG gauges in Wiegand connections.
Explains Wiegand output format enablement and support for Clock & Data protocol.
Illustrates wiring for SDAC, including deadbolt, door strike, and push button connections.
Describes the internal relay's functionality, current limits, and recommended usage for SDAC.
Explains the First Boot Assistant's role in configuring fundamental device settings like date, time, and network.
Guides users on how to access and use the administrator menu via the touch screen.
Details the connection and configuration options within the MorphoBioToolBox application.
States that VisionPass terminals are compatible with MorphoManager application version 14.3 or higher.
Lists the user data required for local enrollment, such as name, face, PIN, and access rights.
Provides instructions on how to properly capture the user's face for successful enrollment.
Explains the process of placing the contactless card and entering the PIN for authentication.
Describes the optional Time & Attendance feature and its dedicated function keys.
Offers advice on terminal repair, using original accessories, and cleaning the device.
Recommends installing the latest firmware and synchronizing the terminal's clock.
Lists various guides available for installing, administering, and developing with the VisionPass terminal.
Provides contact details for technical support and the official website for updates.
To Next Page
