EasyManua.ls Logo

Idex HURST eDRAULIC SC 258 E2 - Cutting

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
It is strictly prohibited to reach into the path of the
rescue device (e.g. between the blades and the material/
object to which the force is to be applied)!
CAUTION / PLEASE NOTE!
The strong e󰀨ect of the force of the rescue equipment during operation could
causepiecesofthevehicleto break o󰀨 or yo󰀨,posingadangerto persons.
Those not involved in the rescue operation should therefore keep at a safe
distance appropriate to th
esituation.Anytrapped or enclosed persons must
beprotected.
6.2 Cutting
Thebladesshouldbepositionedata90°angletotheobjecttobecut,ifpossible.
RIGHT
WRONG
12
9
3
15°
15°
90°
Highercuttingcapacitiescanbeachievedbycuttingascloseaspossibletotheblade’spivotpoint.
RIGHT
WRONG