Idex HURST eDRAULIC SC 258 E2 - Pulling

20
6.4 Pulling
WARNING / CAUTION / PLEASE NOTE!
The light metal alloy arms may not be damaged.
- HURSTchainsetsmustbeusedforpulling.
- Whenusingachainforpulling,makesurethatthepinsandhooksarepositionedcorrectly
sothatthechaincannotslip.
- Onlychainsetsinperfectconditionmaybeused.
- Thepullingchainsmustbecheckedbyanexpertatleastonceayear.
- Alsoconsulttheseparateoperatinginstructionsforthecorrespondingchainset!
Attachmenthole
forchainsets
ATheconnectingpiecesforHURSTchain
setsarefastenedtothebladesusing
loadboltsinholes"A".(seeillustration
ontheright)
Chain sets:
forSC258E2: KSV8/258
forSC358E2: KSV11
forSC757E2: KSV13
forSC758E2: KSV13
NOTE:
Alsotakenoteofalltheinstructionsandregulationsintheseparatelyprovided
operatinginstructionsforthechainsets.