BIBD-ICP User’s Manual
3.5 Boot Menu
This menu allows you to setup the system boot options.
Setup Prompt Timeout
This item sets number of seconds to wait for setup activation
key. Options: 2 (Default)
Bootup NumLock State
This item selects the keyboard NumLock
state. Options: On (Default) / Off
Full Screen Logo Display
This item allows you to enable/disable Full Screen Logo Show
function. Options: Disabled (Default) / Enabled
Boot Success Beep
When this item is set to Enabled, BIOS will let user know boot success with beep.
Options: Enabled (Default) / Disabled
Boot Option
The items specify the boot device priority sequence from the available devices. The number of
device items that appears on the screen depends on the number of devices installed in the system.
Chapter 2: Hardware installation | 43
To Next Page
Loading...