To Next PageTo Next PageWhat to do if the CPU overheats on my iDiPOS Touch terminals?
If the CPU of your iDiPOS Touch terminal overheats, the CPU protection function activates. To resolve this, remove the power cord from the power supply for a few seconds, then wait. Plug the power cord back in and boot up the system. If the issue persists, clear the CMOS data, wait, and power on the system again.
How to fix iDiPOS Touch terminals that won't boot after installing a second hard drive?
If your iDiPOS Touch terminal system cannot boot after you install a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. You may also call the drive manufacturers for compatibility information with other drives.
What to do if iDiPOS Touch terminals show 'Invalid Configuration'?
If your iDiPOS Touch terminal displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is in the setup.
How to troubleshoot power issues in iDiPOS Touch terminals?
If there is no power in your iDiPOS Touch terminal system, make sure the power cable is securely plugged in. If it is, try replacing the cable. If the issue still persists, contact technical support.
General| Brand | iDiPOS |
|---|---|
| Model | WP85 |
| Category | Touch terminals |
| Language | English |
Instructions for preparing a safe and stable environment for motherboard installation.
Lists the components included in the motherboard package, noting potential variations.
Details the technical specifications of the motherboard, including CPU, graphics, I/O, memory, and expansion slots.
Illustrates and describes the connectors located on the rear panel of the motherboard.
Provides a diagram showing the location of various components and headers on the motherboard.
Details the onboard Intel® SOC and its integrated cooling system for the CPU.
Instructions on connecting CPU and system fan cables to their respective headers.
Guide on installing DDR3L Memory Modules (SO-DIMM) into the DIMMA1 and DIMMB1 slots.
Information on connecting ATX Power Source and HDD Power Connectors for system operation.
Explains jumper settings, front panel connections, and various onboard connectors.
Details the Mini PCI-E Slot and instructions for installing expansion cards.
Instructions on navigating and using the UEFI BIOS setup utility, including key functions.
Overview of the Main Menu displaying system information and basic settings.
Configuration options for CPU, Super I/O, Power Management, and system devices.
Configuration of the PCI bus system, North Bridge, and South Bridge parameters.
Settings for administrator/user passwords and secure boot configuration.
Setup for system boot options, including device priorities and startup settings.
Options to load defaults, save changes, or discard changes and exit BIOS setup.
Guide on installing motherboard drivers and software from the provided DVD.
Lists beep codes for POST errors and successful booting for system diagnostics.
Details various POST checkpoints and their descriptions for system diagnostics.
Common troubleshooting scenarios and solutions, including CPU overheating and system boot issues.
