ID TECH VP3300 OEM User Manual
Page | 5
1. Introduction
VP3300 OEM is ID TECH's ultra-compact, EMV L1/L2-certified 3-way (MSR, contact EMV, and
contactless) card reader, based on the VP3300-series design, but with card-reader componentry
externalized to allow custom placement of the chip card slot and the magnetic stripe read head
within a customer-designed chassis.
The VP3300 OEM is built to optimize cost, high reliability, and maximum compatibility with existing
contactless payment technologies (including Apple Pay, Android Pay, and Samsung Pay).
The VP3300 OEM incorporates the proven ID TECH Common Contact EMV L2 kernel that is also
found in ID TECH's popular UniPay III card reader. Developers can integrate VP3300 OEM into
terminal systems with minimal effort using ID TECH's Universal SDK, available for Windows, Android,
or iOS.
1.1. Major VP3300 OEM Features
• Micro-USB port for communications and power
• Magnetic stripe support: ISO 7810/ISO 7811, Hi-Co+Lo-Co Magnetic, JIS1/JIS2
• MSR is bidirectional, reading up to 3 tracks of data at once
• ICC support: EMV Level 1 and EMV L2 approvals. All L1 & L2 on the device
• Contactless transaction support via Near Field Communication (NFC)
• LED status indicator
• Audio feedback
• Field upgradable firmware
• Standby mode for low power consumption
• Compact and ergonomic design to integrate with a variety of devices
• Available with a sturdy stand, for tabletop use
• TDES and AES 128 encryption support
• DUKPT key management
• Software Development Kits for Windows, Android, and iOS
• One-year manufacturer's warranty
• Supports 16 contact and 16 contactless AIDs, for a total of 32 AIDs
1.2. Magnetic Stripe Features
• ISO 7810 / ISO 7811
• AAMVA format
• JIS I / II
• Single / Dual / Triple Track Support
• Bi-directional reading
• Samsung Pay MST
To Next Page
Loading...
