IFM Electronic DTE101 - 7�2�4 Led; 7�2�5 Leds IO1

15
UK
7.2.4 LED BF
LED red LED green Status Note
off off no voltage supply check the voltage supply
off flashes
PROFINET IO controller is in
STOP mode
-
off on
PROFINET IO controller is in
RUN mode
-
flashes off
connection to the PROFINET
IO controller is established,
no valid configuration
check configuration
on off
no connection to
PROFINET IO controller
check connection
flashes flashes self-test starting phase of the device
7.2.5 LEDs IO1 ... IO4
The LED indications of the process connections differ with each connection
configuration�
Use as input to IEC 61131
LED green LED yellow Status Note
Off Off Interface deactivated
Interface in PROFINET IO
controller not configured
On Off
Interface activated, input on
L level (0 V)
-
On On
Interface activated, input on
H level (24 V)
-
Flashes at
8 Hz
Flashes at
8 Hz
Overload or short circuit -