5
UK
comply with the applicable national and international standards� Responsibility lies
with the person installing the device�
This is a class A product� The device may cause radio interference in
domestic areas� In this case it can be necessary for the user to take ap-
propriate measures�
2.3 Tampering with the device
Tampering with the device is not allowed and will lead to an exclusion of liability
and warranty� Tampering with the device can affect the safety of operators and
machinery�
► Do not open the device�
► Do not insert any objects into the device�
► Prevent metal foreign bodies from penetrating�
3 Functions and features
The RFID evaluation unit DTE101 integrates a PROFINET IO interface and 4
channels for the connection of field devices� Each channel can be used either for
the connection of an RFID antenna or as input/output to IEC 61131�
The device
• controls the data exchange to the RFID antennas or the sensor/actuator level�
• communicates with the higher-level control level via PROFINET IO�
• allows device configuration via a web server�
Application examples:
• Material flow control in production lines
• Warehouse management by the automatic detection of stored products
• Tank management, order picking or product tracking
3.1 Configuration via Ethernet interface
• 10 Mbps and 100 Mbps
• TCP / IP - Transport Control Protocol / Internet Protocol
• UDP - User Datagram Protocol
• IT functionality: HTTP server
• M12, twisted pair
To Next Page
Loading...