IFM Electronic PN7004 - Safety Instructions

3
UK
1 Preliminary note
1.1 Symbols used
► Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
→ Cross-reference
Important note:
Non-compliance can result in malfunctions or interference�
2 Safety instructions
• Please read this document prior to set-up of the unit� Ensure that the product is
suitable for your application without any restrictions�
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property can occur�
• Checkthecompatibilityoftheproductmaterials(→chapter12Technicaldata)
with the media to be measured in all applications�
• Use in gases at pressures > 25 bar only after contacting the manufacturer ifm�
13 Factory setting �������������������������������������������������������������������������������������������������19