IFM CR2016 - Set-up; PLC Configuration CODESYS 2.3

UK
CabinetModule CR2016
9
7 Set-up
7.1 PLC configuration in CODESYS 2.3
Parameter setting of the device functions and of the CAN interface is directly done
from the application programmed with CODESYS 2�3� To do so, the „Electronic
Data Sheet“ (EDS) is integrated via the CODESYS PLC configuration�
CODESYS dialogue „PLC configuration“ (example)
For a description of the setting and application of the „PLC configuration“ dialogue
see the CODESY manual and the CODESYS online help�