IFM SI6600 - Preliminary Note; 1�1 Symbols Used; Safety Instructions

3
UK
1 Preliminary note
You will find technical data, approvals and further information using the QR
code on the unit / packaging or at www�ifm�com�
1.1 Symbols used
► Instruction
> Reaction, result
→ Cross-reference
Important note
Non-compliance may result in malfunction or interference�
LED lights green
LED lights orange
LED lights red
LED flashes
2 Safety instructions
• The device described is a subcomponent for integration into a system�
- The manufacturer is responsible for the safety of the system�
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system�
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
• Only use the product for its intended purpose (→ Functions and features).
• Only use the product for permissible media (→ Technical data).