SAFETY
IC75 ENG 1-4
DO NOT TRAVEL WITH THE BODY IN DUMP
POSITION
Traveling with the body in dump position not only makes
the machine unstable but limits operator visibility causing
hazardous situations.
Never attempt to travel with the body in dump position.
DO NOT OVERLOAD
• Working with loads exceeding the performance of the
machine can cause loss of safety or reduction in the
functionality or life of the machine.
• Never exceed the maximum load limits.
• Never place a load onto the sideracks.
DO NOT EXCEED THE WATER DEPTH LIMIT
The acceptable water limit is up to the lower roller.
Check the water depth, foundation and strength of water
current and other safety factors before operating. Do not
place the machine in locations exceeding the lower frame
of the machine.
DO NOT TRY TO TRAVEL OVER OBSTRUCTIONS
Trying to travel over obstacles could cause the machine
to lose its balance and topple over.
Avoid potential obstacles in your path.
llowable water depth
To Next Page
Loading...