CONTROLS
IC75 ENG 2-5
Meters
Tachometer
This meter indicates the engine revolution per minute.
Service hour meter
• This meter indicates the total service hours of the
engine.
The smallest digit shows 1/10 hour (six minutes).
• The meter advances if the engine runs, even though
the machine does not work.
• The total service hours serve as the standard of
inspection and maintenance.
Switches
Turn signal switch
This switch works when the engine key switch is set to
ON.
Use the lever (1) to change the direction indicator lamps.
B : The right direction indicator lamp blinks.
OFF : The lamps are off.
A : The left direction indicator lamp blinks.
Head light switch
This switch works when the engine key switch is set to
ON.
Use the lever (2) to change the head lights.
Turn the lever to point the mark (►) to a symbol.
: (OFF)
: (ON) Two outside lights emit light downward.
: (ON) Four lights emit light upward.
Horn switch
Press the button (3) of this switch to turn on the horn.
OFF
To Next Page
Loading...