IHI IC75 - Page 34

CONTROLS
IC75 ENG 2-6
Travel speed select switch
Use this switch to change the travel speed in two steps.
High speed: Push down on the
mark. The mark lamp
goes on.
Low speed: Push down the no-mark position. The mark
lamp goes out.
Parking switch
Push this switch to apply the parking brake.
ON: Push down on the P mark position. The mark
lamp goes on.
OFF: Push down the no-mark position. The mark lamp
goes out.
Car heater switch
Use this switch to turn on the fan of the cabin heater.
High and Low may be selected.
HIGH: Push down on the HIGH mark.
LOW: Push down on the LOW mark.
• Push down on the center to turn off the heater.
Engine throttle dial
Use this dial to adjust the engine speed and output.
High: Turn the dial to the
mark position.
Low: Turn the dial to the
mark position.