SAFETY
IC75 ENG 1-15
18. Sign indicates a hazard
of a flying plug from track
adjuster that could cause
injury.
Read manual before
adjusting track for safe
and proper handling.
(D405 485 00)
19. Sign indicates an
explosion hazard.
Never drill, cut with
gas, hit or
disassemble. Also,
keep open flame
away.
(D405 362 00)
20. Sign indicates the
necessity of fastening
the seat belt.
Always keep the seat
belt fastened while
operating the machine to
minimize danger caused
by accidents such as
falling down.
(D407 741 00)
21.
Sign indicates a crush hazard from
falling body.
Read manual and follow safety
instructions when holding the body in a
raised position.
(D405 487 00)
22.
Sign indicates a hazard of being run over by
moving equipment.
Keep away from equipment when it is
moving.
(D405 488 00)
23.
Attach a DO NOT OPERATE warning
tag to start switch or controls before
servicing or repairing the machine.
Do not start the engine or move any of
the controls if there is DO NOT
OPERATE or similar warning tag
attached to the start switch or controls.
(D405 323 00)
To Next Page
Loading...