Need help?Do you have a question about the iHome HiH66 and is the answer not in the manual?
General| Brand | iHome |
|---|---|
| Model | HiH66 |
| Category | Docking Station |
| Language | English |
Connect the AC adaptor to the HiH66 and plug into a wall socket.
Remove rear cover to adjust time zone and settings.
Set the time zone and clock on the unit.
Tune and save FM radio stations as presets.
Attach the security tether to prevent theft.
Connect the AC adaptor to the unit and a wall socket.
How to set the time zone, clock, and DST.
Set, arm, disarm, and use alarm features like snooze.
Docking, playing, and charging your iPod.
Setting up the antenna, tuning, and playing radio.
Connect external audio devices via line-in cord.
Adjust the brightness of the LCD display.
How to install or replace backup batteries for power failure.
Guidelines on mixing and using batteries.
Do not use the unit near water.
Ensure proper ventilation and avoid blocking openings.
Keep unit away from heat sources.
Connect only to specified power supply type.
Route cables to avoid walking on or pinching.
Clean unit only as recommended in maintenance section.
Prevent objects from falling or liquids from spilling.
Do not use attachments not recommended by manufacturer.
Unplug during storms or long periods of non-use.
Do not overload wall sockets or extension cords.
List of conditions requiring professional service.
Do not connect external antennas other than provided.
Unplug cable when unit is unused for extended periods.
Do not attempt to service beyond operating instructions.
AC adaptor not plugged in or not connected to the unit.
Unit requires a reset; unplug, remove iPod, wait, and reconnect.
Check for obstructions and reseat iPod in dock.
Batteries are weak or not installed properly.
Check iPod installation, software, or reset iPod.
Unit may be reacting to external interference.
Ensure volume is turned up.
Check iPod installation and battery status.
Adjust volume or check sound source quality.
Unit may get warm after extended play at high volume.
Line out jack needs amplification; use powered speakers.
Electrostatic charge from line-in cord; store cord properly.
To Next Page
