quick start
2
P4
Gently dock your iPad, iPhone or iPod onto the 30 pin dock.
The iPad, iPhone or iPod will charge while docked. Press the
Button on the unit to play your iPad, iPhone or iPod.
2: docking your
iPad/iPhone/iPod
3: Setting Clock with AutoSync 4: Radio
Dock your iPad, iPhone or iPod (see step 2). The
unit will attempt to autosync to the time on your iPad,
iPhone or iPod. This process takes about 3 seconds.
Press and release the Mode Button as needed to
select FM band. Press and release the + or -
Button to tune in a station. See page 5 for
programming presets.
Attach AC adaptor cable to DC jack on
back of the unit and plug the other end
into a wall socket. Remove pull tab from
the backup battery compartment on the
bottom of the unit.
1: power
To Next Page
Loading...
