IHP BarcelonaLights36ZEN - Page 10

IHP.us.com
900861-00NC
10
NOTE: This fireplace requires metal
studs for framing. Wood studs are not
permitted.
Model:
Natural Gas (NG)
A
Width
B
Height
C
Depth
BarcelonaLights36ZEN or VRE4636ZEN
40-1/2” (1029mm) 37-3/4” (959mm) 16-1/4” (413mm)
BarcelonaLights48ZEN or VRE4648ZEN
52-1/2” (1334mm) 37-3/4” (959mm) 16-1/4” (413mm)
BarcelonaLights60ZEN or VRE4660ZEN
64-1/2” (1638mm) 37-3/4” (959mm) 16-1/4” (413mm)
BarcelonaLights72ZEN or VRE4672ZEN
76-1/2” (1943mm) 37-3/4” (959mm) 16-1/4” (413mm)
Table 4 - Fireplace framing dimensions.
Figure 8 - Framing dimensions using all non-combustible materials for single-sided fireplace; refer to Table 4.
A
B
Metal Studs Metal Studs
* Metal studs shown in gray.
Bottom Support Fin
Hood
C
Metal Studs
Metal Studs
Top view showing 1/2” lip using
non-combustible facing material at front face
(Front)
NOTE: This outdoor fireplace is not a
“load bearing” fireplace. All finishing
materials must be supported by the
surrounding structure and not rely on
the fireplace itself.
SINGLE-SIDED FRAMING DIMENSIONS WITH METAL STUDS
Top view showing 1/2” (13mm) lip using
non-combustible facing material at front face