Ihse Draco tera 480 Series - KVM-Switching

Draco tera
208 2020-02-26
Pos: 124 /806-IHS E/Betrieb/KVM -Schaltung/ 480-xx @ 7\m od_13099408 63555_6.doc @ 53 563 @ 22 @ 4
6.2 KVM-Switching
You have the following option to perform switching operations with the
Draco tera:
OSD
➔ Select Switch in the main menu.
By pressing <F8>, inactive CPU devices can be shown in order to expand
the current view.
Menu Switch
To switch the console to any available CPU, proceed as follows:
1. Select in the CPU Devices list on the left hand side that one that
should be connected to the CON Device.
2. Confirm desired connection type with the appropriate keyboard
command.