Ihse Draco tera 480 Series - System Settings

Configuration
2020-02-26 83
Pos: 58 /806-IHSE/ Konfiguration /Systemeinstellu ng/480-xx/ Systemeinstellung en @ 7\m od_130993796127 4_6.doc @ 530 32 @ 2 @ 1
5.4 System Settings
You have the option to configure the following system settings at the
Draco tera.
The configuration of the system settings can only be done by users with
administrator rights.
Pos: 59 /806-IHSE/ Konfiguration /Systemeinstellu ng/480-xx/ System Data @ 7 \mod_130993 8005493_6.d oc @ 53050 @ 3 @ 4
5.4.1 System Data
The system configuration is set in this menu.
You have the following options to access the menu:
You can select the following settings:
Field
Selection
Description
Device
Text
Enter the device name of the matrix
(default: SWITCH_01)
Name
Text
Enter the name of the configuration that is
used to save the current settings
(default: Standard)
Info
Text
Additional text field to describe the
configuration (default: Factory settings)
Sub Matrix
activated
If the matrix is defined as a sub matrix in
the OSD, the user will lose control. Control
can be recovered by using the keyboard
command <Shift>, <Shift>, <s>, <o>. The
OSD for the matrix that has been defined
as sub matrix will be reopened.
deactivated
Function not active (default)
Load Default
activated
Starting the matrix after a restart or a
switch-on with the default configuration.
deactivated
Starting the matrix after a restart or a
switch-on with the last saved configuration
(default).