Ihse Draco tera 480 Series - Network

Configuration
2020-02-26 99
Pos: 66 /806-IHSE/ Konfiguration /Systemeinstellu ng/480-xx/N etzwerk (Network) @ 7\mod_ 13099381783 05_6.doc @ 5312 2 @ 3 @ 4
5.4.5 Network
The network configuration is set in this menu.
You have the following options to access the menu:
You can select the following settings:
Field
Selection
Description
DHCP
activated
The network settings are automatically
supplied by a DNS server
Note: If DHCP is activated and there is
no physical network connection
available, the boot times might increase.
2nd field for redundant CPU board
deactivated
Function not active (default)
IP address
Byte
Input of the IP address, if DHCP is not
active (default: 192.168.100.99)
Note: 2nd field for redundant CPU board
Subnet Mask
Byte
Input of the subnet mask in the form
"255.255.255.0", if DHCP is not active
(default: 255.255.255.0)
Note: 2nd field for redundant CPU board
Multicast
Byte
Input of the Multicast address, if there is
a Matrix Grid in use within a Multicast
group (default: 255.255.255.255)
Gateway
Byte
Input of the subnet mask in the form
"192.168.1.1", if DHCP is not active
Note: 2nd field for redundant CPU
board. When using the controller board
480-CTRL2, entering a gateway is
obligatory.
API Service
activated
LAN interface at the Draco tera activated
for access via Java Tool (API service
port 5555)
deactivated
Function not active
SSL
activated
Activate SSL encryption for API, Java
Tool API, Java Tool und Matrix Grid
communication (only with 480-CTRL2).
deactivated
Function not active (default)